The unit is designed to monitor the quality of the water output of Deionized Water Systems and send an e-mail to a predetermined email address when the water quality drops below a threshold that is set by the user.
Input types:
Flow Sensor - Is present to measure and report total gallons.
Resistivity Probe - Measures the water quality.
Temperature Sensor - Housed in the resistivity probe allows temperature compensation of the resisitvity.
Operating Requirements:
Standard electrical outlet (120volts)
Standard phone jack
Easy Setup:
Setup Mode: While holding the Reset Button, press the Test Button…. Then release the Reset Button. This places the unit in the Setup Mode. By pressing the Test Button slowly allowing about one second or so between presses, a different threshold value is selected as indicated in the chart below. There are five choices for the threshold.
